#26
IP: 24.152.132.140
|
||||
|
||||
If you ever upgrade to electronic ignition please talk to us first.
__________________
Neil 1977 Catalina 30 San Pedro, California prior boats 1987 Westsail 32, 1970 Catalina 22 Had my hands in a few others |
The Following User Says Thank You to ndutton For This Useful Post: | ||
SailingReckless (06-03-2019) |
#27
IP: 70.185.132.167
|
|||
|
|||
To Prevent Inadvertently Frying The Coil.......
Quote:
TRUE GRIT |
The Following User Says Thank You to JOHN COOKSON For This Useful Post: | ||
SailingReckless (06-03-2019) |
#28
IP: 24.127.215.222
|
||||
|
||||
YouTube- working on the carburetor
[YOUTUBE]Akvty8qAalo[/YOUTUBE]
[YOUTUBE]https://youtu.be/Akvty8qAalo[/YOUTUBE] After I replaced the coil, I took off the carb and cleaned it out, replaced gaskets and put it back on. Thanks again guys! Now I have new problems tho. Still the white smoke in the exhaust and a wire got so hot that it melted I have to work all week but when I get back to the boat this weekend I’ll show you which one it is Last edited by Administrator; 06-04-2019 at 06:27 AM. Reason: Please read the instructions on how to post a YouTube video. |
#29
IP: 24.127.215.222
|
||||
|
||||
I will talk to you before I do anything at all now😊✌🏼
|
06-03-2019, 06:42 PM |
SailingReckless |
This message has been deleted by SailingReckless.
Reason: Double
|
#30
IP: 70.185.132.167
|
|||
|
|||
SR: Just a quick hint.
I watched the carb repair video. Get a piece of 2X4 an set the carb on it, hold the carb with one hand then tighten the screws with the other hand while you are standing over it. You will be able to get more torque and tighten the screws more evenly. When you hold the carb in one hand and tighten with the other it is almost impossible to torque the screws evenly and increases the chance of a cross thread. TRUE GRIT |
The Following 3 Users Say Thank You to JOHN COOKSON For This Useful Post: | ||
Tags |
carburetor, head gasket, over heating, stalling, thermostat |
|
|