#1
IP: 107.77.204.135
|
|||
|
|||
What is the make and model of this water pump and impeller?
|
#2
IP: 172.58.75.80
|
||||
|
||||
Quote:
The impeller as well. https://moyermarine.com/product/flex...er-csob_02_63/ I'd suggest you call Ken and maybe he can help with getting the missing thumb screw too?
__________________
-Jerry 'Lone Ranger' 1978 RANGER 30 |
#3
IP: 165.225.20.159
|
||||
|
||||
make sure you have all the missing pieces .. I have the impression on one pic that a piece of the impeller is stuck in the exhaust port.
__________________
Surcouf A nostalgic PO - Previously "Almost There" - Catalina 27 (1979) |
#4
IP: 155.186.122.195
|
|||
|
|||
Caution
You have a couple of veins missing off the impeller and they can jam in a passage. However they are small and "usually" work there way to the "exit fitting" on the manifold. Once you get the pump fixed and have run for a bit remove the "exit fitting" on the manifold as they usually get stuck there as it is about the smallest restriction in the system.
Dave Neptune |
#5
IP: 107.77.204.168
|
|||
|
|||
Thanks all, very helpful.
Mark |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
water in oil from exhaust? | afsam94 | Exhaust System | 54 | 05-10-2018 09:21 AM |
Replacment impeller for Oberdorfer not making the grade | Baltimore Sailor | Cooling System | 17 | 06-28-2013 11:57 AM |
Water Pump Mystery - Running out of ideas | Clucas | Troubleshooting | 15 | 05-16-2013 09:16 PM |
Oberdorfer water pump impeller replacement | CalebD | General Maintenance | 0 | 04-05-2010 01:10 PM |
Upgrade Impeller Pump? | SEMIJim | Cooling System | 1 | 07-19-2008 07:35 PM |