#1
IP: 138.207.175.104
|
||||
|
||||
New YouTube Channel
Click here to visit our new YouTube channel and here to check out the first new tech tip video. Don't forget to hit the Like and Subscribe buttons.
More videos on the way... Bill Last edited by Administrator; 03-20-2020 at 12:08 PM. |
The Following 15 Users Say Thank You to Administrator For This Useful Post: | ||
AFisch (03-20-2020), alcodiesel (03-24-2020), Ando (03-24-2020), Easy Rider (03-21-2020), ED.D (03-26-2020), Graham (03-20-2020), HOTFLASH (04-06-2020), Mo (09-18-2020), nyvoyager (03-20-2020), Sam (03-21-2020), sastanley (03-20-2020), Surcouf (06-18-2020), tenders (03-21-2020), TimBSmith (09-09-2020), TomG (03-22-2020) |
#2
IP: 24.61.95.61
|
|||
|
|||
Excellent!!
|
#3
IP: 192.186.122.174
|
||||
|
||||
OH WOW!!
__________________
Greg 1975 Alberg 30 |
#4
IP: 71.208.58.235
|
||||
|
||||
nice!
Why cant we comment on the video? |
#5
IP: 72.69.36.126
|
|||
|
|||
That's so dumb diesel engine salespeople can't talk smack about the A4.
|
#6
IP: 138.207.175.104
|
||||
|
||||
Several more added overnite.
|
#7
IP: 216.212.203.101
|
|||
|
|||
Thank you very much !! What an excellent way to spend some time during this current situation. I just watched the rev gear adj one, Got a better understanding on the adj process.
With that said, you know the survey there a while ago about drilling and tapping, one of our Club members got himself a C&C 27 with his new purchase he thought he better adj the forward gear, you know in the video Don said make sure you are in the slot or you might break out a chunk when you tighten the locking screw. Well I can validate that that statement is correct, my friend wasn't sure what to do, so since in my past I had worked in a production machine shop I volunteered to attempt to drill and tap a new hole ( my friend had talked to Don or Ken and they told him to rotate to a new position - get 2 chances I believe ) . So long story short I got my self in position under his cockpit and I drilled and tap him a new hole for his locking screw. This video this morning just gave me a better visual of what we were doing and attempting to fix. thanks again, Chapster5 |
The Following User Says Thank You to chapster5 For This Useful Post: | ||
TimBSmith (09-09-2020) |
#8
IP: 72.69.36.126
|
|||
|
|||
Have none (knock on wood) of the issues Don covers in videos
Watched all videos nonetheless |
#9
IP: 24.152.132.140
|
||||
|
||||
This is great. For years I've wished Don would present a more authoritative "this is how it's done" position. Well done MMI.
__________________
Neil 1977 Catalina 30 San Pedro, California prior boats 1987 Westsail 32, 1970 Catalina 22 Had my hands in a few others |
The Following User Says Thank You to ndutton For This Useful Post: | ||
Administrator (03-22-2020) |
#10
IP: 72.201.121.64
|
|||
|
|||
This is great. We are a DIY group of Atomic 4 owners, and YouTube is set up for DIYFers. Keeping useful stuff from ending up in landfills is a noble cause.
I am sure MMI has a lot of ideas on how to expand this. Mine is a video on how to "ethanolize" the atomic 4 so we don't have to be so worried about finding ethanol-free fuel.
__________________
Jim Zeller 1982 Catalina 30 Kelleys Island, Ohio |
The Following User Says Thank You to zellerj For This Useful Post: | ||
Sam (03-23-2020) |
#11
IP: 192.55.55.43
|
||||
|
||||
Great job and way to share the info. That is only weakness in the current overhaul manual is that few more pictures would have been great addition, and these videos help a bunch.
Suggestions for future topics. The correct installation and orientation of pistons/rings and rods Installing the cam, lifter, valves and springs and adjusting both I/E valves Showing the proper oil plugs locations and how to test a rebuild for oil pressure prior to starting
__________________
Thanks, Ron Portland, OR |
#12
IP: 192.55.55.43
|
||||
|
||||
Great job and way to share the info. That is only weakness in the current overhaul manual is that few more pictures would have been great addition, and these videos help a bunch.
Suggestions for future topics. The correct installation and orientation of pistons/rings and rods Installing the cam, lifter, valves and springs and adjusting both I/E valves Showing the proper oil plugs locations and how to test a rebuild for oil pressure prior to starting
__________________
Thanks, Ron Portland, OR |
The Following User Says Thank You to ronstory For This Useful Post: | ||
Administrator (03-24-2020) |
#13
IP: 73.225.238.48
|
||||
|
||||
Great job!
No doubt that it's terrific that Moyer Marine is now on YouTube. More impressive is Don's expert, no BS presentation style. Nice work. Thank you so much Don and company!
__________________
Mark C30 "Kismet" |
#14
IP: 138.207.175.104
|
||||
|
||||
Quote:
Bill |
#15
IP: 138.207.175.104
|
||||
|
||||
Playing our YouTube Channel Videos
YouTube has admitted that they're dumbing down the "auto" resolution of their videos lately in response to increased demand. You can still watch ours in HD resolution if you manually set the quality to 1080p.
Bill |
#16
IP: 138.207.175.104
|
||||
|
||||
YouTube Videos on Your TV
Last nite, I dusted off the old Chromecast device and streamed some of the MMI videos to a TV. Works nicely.
(Then I watched a couple of old James Bond movies which are free from Amazon Prime.) I think the current cost of the Chromecast is around $35. I don't have one, but I think you can accomplish the same thing on a so-called "smart TV" without the need for the Chromecast. Bill Last edited by Administrator; 04-04-2020 at 09:07 AM. |
#17
IP: 67.169.215.221
|
||||
|
||||
I have a smart TV with the embedded Roku SW stack. Big thumbs up on the having the web apps downloadable from the Roku ecosytem so they become built-in.
I hardly used my PC anymore with the smart TV... until the stay-at-home orders. Now it get used for Zoom happy hours. (sigh)
__________________
Thanks, Ron Portland, OR |
#18
IP: 138.207.175.104
|
||||
|
||||
Bumped.
The video on carb issues now has more than 1,400 views. Bill |
#19
IP: 73.41.109.158
|
|||
|
|||
About 100 of those are me...
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Posting a YouTube Video | Administrator | Announcements | 6 | 06-03-2019 11:37 AM |
Fascinating YouTube on Marine Salvage | zellerj | General Interest | 2 | 04-11-2015 02:25 PM |
Posting a YouTube Video | Administrator | General Interest | 11 | 01-29-2014 10:51 AM |
iPhone Apps for boating | jpian0923 | General Discussion (Off-Topic) | 20 | 01-15-2012 12:07 AM |
Another YouTube Video | Administrator | General Interest | 0 | 03-26-2010 09:53 AM |