FWC problem

[jess81452]

Having a problem hooking up my fresh water cooling system. The sea water in and out is simple but it would seem that I have one place left to hook a hose and no hose to hook to it.
1-sea water in to in on sea water pump
2-sea water out to radiator
3-sea water out to exhaust injection
4-fresh water out to engine water pump in
5-engine water pump out to engine block
Where do I connect the coolent in and what do I do with the remaing connection? Would appreciate any answer.
Thanks
Jess

[lat 64]

Not enough to go on here.

Can you diagram the system for us, or maybe some photos?
I'm thinking you are having trouble at the place where it comes off the ex manifold and goes to the heat exchanger, but I'm not sure.

There's a drawing showing my general setup but with a cabin heater at:

http://www.moyermarine.com/forums/showthread.php?t=3653

post #12

Russ

[rigspelt]

Does this help? Your setup and dimensions may vary. I made this up for my personal use, not to give advice.