#1
IP: 67.84.45.30
|
|||
|
|||
Rebuilt A4 for sale in NJ
Bought a new boat. Selling A4 engine which was rebuilt in Feb this year. Details here:
http://cnj.craigslist.org/boa/4807592156.html
__________________
Catalina 30, 1977, #421 |
#2
IP: 71.178.85.49
|
||||
|
||||
Val, wait..YOU bought a new boat?
__________________
-Shawn "Holiday" - '89 Alura 35 #109 "Twice Around" - '77 C-30, #511 with original A-4 & MMI manifold - SOLD! (no longer a two boat owner!!) |
#3
IP: 67.84.45.30
|
|||
|
|||
Well its not new. It's a 1982 Canadian Sailcraft 33.
__________________
Catalina 30, 1977, #421 |
#4
IP: 71.178.85.49
|
||||
|
||||
OK, so I'll throw it out there..what's the deal? Selling the motor out of the C-30? What are you doing with the C-30? Selling it with no motor??!?!? Do you have more than one motor?
Details, man, details!
__________________
-Shawn "Holiday" - '89 Alura 35 #109 "Twice Around" - '77 C-30, #511 with original A-4 & MMI manifold - SOLD! (no longer a two boat owner!!) |
#5
IP: 67.84.45.30
|
|||
|
|||
I sent you email
__________________
Catalina 30, 1977, #421 |
#6
IP: 71.178.85.49
|
||||
|
||||
Yes, you did..I understand now.
Might be a few things of interest if you part out the old boat. Good luck with the new project! It probably has a smelly diesel, eh?
__________________
-Shawn "Holiday" - '89 Alura 35 #109 "Twice Around" - '77 C-30, #511 with original A-4 & MMI manifold - SOLD! (no longer a two boat owner!!) |
#7
IP: 67.84.45.30
|
|||
|
|||
Name it. Its yours
__________________
Catalina 30, 1977, #421 |
#8
IP: 71.178.85.49
|
||||
|
||||
Ok, since this is a nice close knit community, some more pics of the traveler system. Mine has the pin stops that I hate. I am always trying to figure out a good way to make it easier to adjust with some line/blocks like you have without replacing the entire system with a high $$ Harken or similar.
Also, my tiller bracket & head are not shiny chrome anymore..they are green bronze..Oh, also, I have (had) the chrome top for the Nicro solar vent that went flying overboard...so maybe a vent...or just the nice shiny cover... Sorry the P.O. made a wreck of the rudder..that doesn't make sense to me. I see you have a bowsprit..Standard or tall rig? I don't really see a reason for a bowsprit except to have a nice place for a bow roller... We might have to talk offline!
__________________
-Shawn "Holiday" - '89 Alura 35 #109 "Twice Around" - '77 C-30, #511 with original A-4 & MMI manifold - SOLD! (no longer a two boat owner!!) Last edited by sastanley; 12-16-2014 at 11:22 PM. |
#9
IP: 67.84.45.30
|
|||
|
|||
Quote:
Rudder was shot. I had to rebuild it. The traveler works but not great under load. Its an old curved style. I'll get more pix for you. There is no solar on the boat. There is a vent cover that is chrome. It has a wire mesh in the middle. Is this what you need? Boat is TRBS hence the bowsprit. Bobstay is a PAIN when mooring. Val
__________________
Catalina 30, 1977, #421 |
#10
IP: 71.178.85.49
|
||||
|
||||
Quote:
I scanned thru the pics and now see that the rudder went thru a major transformation. I have the STD rig, so a TRBS would not work real well..interesting that the TRBS headstay still fits inside the old school pulpit, regardless of rig configuration. I was thinking about increasing sail area when I had a new genoa built in a few years with a bowsprit, but I can see the issues related to the bobstay. I might just stick with what I've got.
__________________
-Shawn "Holiday" - '89 Alura 35 #109 "Twice Around" - '77 C-30, #511 with original A-4 & MMI manifold - SOLD! (no longer a two boat owner!!) |
#11
IP: 50.250.54.161
|
|||
|
|||
Rebuilt A4 for sale in NJ
Hi Val, you wouldnt happen to have the throttle-shifter mechanism for the non steering wheel, tiller steering C-30 would you.
|
#12
IP: 71.59.69.172
|
||||
|
||||
Have a fresh water cooling system for sale?
__________________
Bill 1974, Tartan 30, Unchained Melody www.CanvasWorks.US |
#13
IP: 71.59.69.172
|
||||
|
||||
From the cryptic posts I'm guessing that this "parting" isn't a happy affair. If that is the case please accept my condolences for whatever let to the decision to do so.
A little over 4 years back, when I was forced to give up beachcat sailing due to a big change in my mobility, I parted out my Prindle 19. She, Badabing, was a sweet boat that I had spent much more than reasonable in improving her. Over the winter when I was laid up the boat storage yard mysteriously "lost my trailer, Badabing was on the floating dock. Without the trailer selling her, as is where is, was a loosing proposition. Frankly I couldn't have gotten what her sails Pentex sails were worth. So when I could I started pulling her apart and selling her part by part. It was a hart breaking experience. But the silver cloud was that I ended up getting about 25% more that I would have hoped for if the trailer had not been misplaced and if I sold her together. A few months later I found the remains of the trailer in a marsh area next to the boat yard. Someone had cut her off her catamaran rollers, the storage box and tossed the unwanted parts, along with the beach wheels in the weeds. So I was then able to sell the beach wheels as well also. Sorry for hijacking the thread. If you are parting out the C30. where is she and what do you have to sell? Im also in NJ, Little Egg Harbor. Im looking for Freshwater cooling A jib furler Im adding a forsail behind my 155 Genoa roller Them is the biggies for the T30 Thanks Bill
__________________
Bill 1974, Tartan 30, Unchained Melody www.CanvasWorks.US |
#14
IP: 67.84.45.30
|
|||
|
|||
Quote:
Long story short, I am trying to recoup at least 40-50% of the money I put in. Selling it as-is most likely will only attract buyers who will part it for profit anyway. I am in central jersey. About 10-15 minutes from Raritan Bay (Perth Amboy). You are a little south of me. PM me about the furler. I have Harken MK II
__________________
Catalina 30, 1977, #421 Last edited by Val V; 01-16-2015 at 08:58 AM. |
#15
IP: 67.84.45.30
|
|||
|
|||
I do but the set screws may have to be changed/tightened. Havent taken it appart but its pretty loose.
__________________
Catalina 30, 1977, #421 |
#16
IP: 50.250.54.161
|
|||
|
|||
As log as it is fixable that is great. I purchased my first sail boat and don't like the steering wheel setup, the steering is in the middle and takes up a lot of room in the cockpit, especially when the family is aboard so I am going with the tiller setup. What do you need to get for the set up. I live in Ct and could pick it up if that is OK. Are you parting the boat out, maybe their is other parts I need?
Thank you Ed Last edited by Timeflys; 01-16-2015 at 09:42 AM. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
New & some rebuilt parts - LOTS - 3 motors | SeattleIanReilly | For Sale - Engines and Engine Parts | 2 | 02-11-2013 12:07 AM |
Rebuilt A4 for Sale!!! | john | For Sale - Engines and Engine Parts | 1 | 07-25-2010 02:19 PM |
New Product - Zenith carburetor - late model (rebuilt) | Don Moyer | Fuel System | 14 | 11-29-2009 11:37 AM |
MM rebuilt starter seems dead | skhorleb | Troubleshooting | 3 | 09-17-2009 07:13 AM |
Carburetor service kit or Rebuilt Carb (Late Model) | bgilbert | Fuel System | 8 | 06-29-2009 05:37 PM |