Belt sizes

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • ScottLynds
    Frequent Contributor
    • Jun 2005
    • 5
    #1

    Belt sizes

    Hi, I recently purchased a Pearson 323 that has an Atomic 4 engine. I am away from the boat but would like to purchased spare belts for the alternator and raw water pump before I go to the boat next. Can anyone tell me what the size of these belts are? I believe the engine has not been modified in anyway so both would be the original configuration.
    Thanks, Scott
    Tags: None
  • edwardc
    Afourian MVP
    • Aug 2009
    • 2491
    #2
    Scott,

    The 323 with the original Motorola 35 amp alternator takes a 25" belt. If it has the 55 amp alternator, it takes a 26".

    The early 323s that had A4s came OEM with raw water cooling, so there is no "standard" pump arrangement for FWC.
    I believe the Moyer add-on pump at the flywheel also takes a 26" belt.
    Last edited by edwardc; 07-18-2015, 11:23 PM.
    @(^.^)@ Ed
    1977 Pearson P-323 "Dolce Vita"
    with rebuilt Atomic-4

    sigpic

    Comment

    • hanleyclifford
      Afourian MVP
      • Mar 2010
      • 6990
      #3
      There can also be difference in width. Early engines ran 3/8" while later ones are 1/2".

      Comment

      • hanleyclifford
        Afourian MVP
        • Mar 2010
        • 6990
        #4
        Check out some of the prices on this site - can these be for real? http://www.vbeltsupply.com/?pi_ad_id...FUgWHwodlz4EGA

        Comment

        • ScottLynds
          Frequent Contributor
          • Jun 2005
          • 5
          #5
          Thanks for the replies Scott

          Comment

          Previous template Next
          Working...
          X