Return to the home page...

Go Back   Moyer Marine Atomic 4 Community - Home of the Afourians > Owner Discussion Groups > Discussion Groups > C&C

Reply
 
Thread Tools Display Modes
  #1   IP: 76.66.49.133
Old 04-29-2008, 10:39 PM
pmcdonald pmcdonald is offline
Member
 
Join Date: Feb 2008
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
Hot Exhaust for a C&C 27

Has anyone replaced the hot section of their exhaust on a C&C 27 and if so, do you have pictures?
Reply With Quote
  #2   IP: 71.232.2.22
Old 05-28-2008, 04:12 PM
Dana Mace's Avatar
Dana Mace Dana Mace is offline
Senior Member
 
Join Date: Jan 2008
Location: Marblehead Ma
Posts: 54
Thanks: 1
Thanked 1 Time in 1 Post
Exhaust

I have a 1976 C&C 27 that the p.o. had just replaced the ehaust .
If you want I could take some pics
Dana
Marblehead Ma
Reply With Quote
  #3   IP: 20.132.64.140
Old 05-29-2008, 06:15 AM
castinemarine castinemarine is offline
Senior Member
 
Join Date: May 2007
Location: South Freeport, ME
Posts: 19
Thanks: 0
Thanked 0 Times in 0 Posts
Send a message via Yahoo to castinemarine
Exhaust pics

Dana,

I'd love to see any photos you have. I am in the middle of a major engine refit and I am replacing the hot leg of my exhaust system.

Thanks, Chris
__________________
Chris

72' C+C 35 Mk I "Surfrider"
South Freeport, ME

Reply With Quote
  #4   IP: 70.51.65.17
Old 08-04-2008, 09:20 AM
sailcnc sailcnc is offline
Frequent Contributor
 
Join Date: Aug 2008
Posts: 8
Thanks: 0
Thanked 0 Times in 0 Posts
C&C 27 Exhaust.

The C&C 27 and the 30 are the same. I replaced my 30 with a Stainless exhaust. It was really simple. I remember that I found a drawing on a A4 site which showed the basic pieces needed. The main thing to remember is that you will need to save the flange that attaches to the motor. Carefully cut the pipe from the inside to remove it. then you can reuse the flange on the new exhaust. You can also purchase header wrap from a performance automotive shop to re wrap the exhaust.

Joe
Reply With Quote
  #5   IP: 142.68.121.160
Old 10-02-2008, 05:31 AM
rigspelt's Avatar
rigspelt rigspelt is offline
Afourian MVP
 
Join Date: May 2008
Posts: 1,187
Thanks: 0
Thanked 19 Times in 17 Posts
I am also revising the exhaust system on a C&C 27 (Mk II) and need to learn more about best solutions. May need to rebuild the waterlift muffler position to get optimum location, but not sure. Lots to consider. I would like to see photos of other 27 and 30 solutions. There are photos of diesel setups on cc27association.com.
__________________
1974 C&C 27

Last edited by rigspelt; 10-02-2008 at 05:57 AM.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
New exhaust system jsedivy Exhaust System 11 08-01-2011 07:50 PM
Lots of cooling and exhaust symptoms skhorleb Cooling System 8 02-26-2007 07:17 AM
Stuck #4 Exhaust Valve: A special Tartan 30 problem? jellisfeingold Tartan 7 12-09-2006 03:11 PM
cooling or exhaust issue? rondahart Cooling System 3 07-14-2006 11:00 AM


All times are GMT -4. The time now is 09:53 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.


Universal® is a registered trademark of Westerbeke Corporation

Copyright © 2004-2024 Moyer Marine Inc.

All Rights Reserved