Return to the home page...

Go Back   Moyer Marine Atomic 4 Community - Home of the Afourians > Discussion Topics > Exhaust System

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1   IP: 72.94.92.192
Old 04-14-2022, 09:22 AM
SbMolly SbMolly is offline
Senior Member
 
Join Date: Jul 2021
Posts: 14
Thanks: 9
Thanked 5 Times in 4 Posts
Exhaust fabrication

I wish I took a pic to better show my current exhaust , but I imagine it’s a fairly typical setup - black iron pipe attached to a flange on the manifold, goes straight up 12 inches or so, curves back down 180 degrees, drops a few inches before attachment point for cooling water, and then large ( 2 5/8” I believe) exhaust hose off to the muffler.

The iron is in pretty rough shape - rusting away to the point that big chunks are flaking off. So I need to get this taken care of. Seems like it would be easy enough to build with off the shelf Home Depot parts - but not sure on the flange which connect to the manifold. Moyer sells a flange for $70, do I start with that, and then just buy the pipe I need? How do I seal the threads? Is it really necessary to wrap the exhaust? The old stuff is coming off all over the motor, would rather not replace.

Has anyone built, or purchased, an exhaust who can give me some pointers? Thanks.

Last edited by SbMolly; 04-14-2022 at 09:30 AM.
Reply With Quote
The Following User Says Thank You to SbMolly For This Useful Post:
TimBSmith (04-14-2022)
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Exhaust system size ndutton Exhaust System 74 03-03-2022 04:24 PM
New exhaust system jsedivy Exhaust System 11 08-01-2011 07:50 PM
Loud exhaust noise, what can it be? Carlos Barberis General Interest 11 03-16-2011 02:46 AM
Tartan 30 exhaust system rebuild jacques debauche Tartan 2 05-22-2010 06:48 AM
Elevated Exhaust Back Pressure 76oDay Exhaust System 9 04-19-2010 08:13 AM


All times are GMT -4. The time now is 12:58 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.


Universal® is a registered trademark of Westerbeke Corporation

Copyright © 2004-2024 Moyer Marine Inc.

All Rights Reserved