View Single Post
  #68   IP: 24.19.226.68
Old 06-14-2022, 05:21 PM
bigoledave's Avatar
bigoledave bigoledave is offline
Senior Member
 
Join Date: Jun 2008
Location: Indianola, WA
Posts: 68
Thanks: 18
Thanked 2 Times in 2 Posts
more info from the vendor---output voltage

"...Greetings....quick question on the alternator I purchased. Do you have any
specifications from the manufacturer regarding the maximum OUTPUT VOLTAGE
these units should have? I have heard that SOMETIMES, this exact alternator
MAY put out "too high" of a voltage. Any comments appreciated. Also do you
have any actual INSTRUCTIONS for hooking this up? Mine came with just
a small card. Thank you!!!!!!,.."

answer receivesd:

"...New message from: forklift-pro (2,109RED_STAR Star)
Regulator set point is 14.2 volts. The alternator is a one wire self excited unit. Hook up is just the Battery output post on alternator to positive terminal of battery and a good ground to the frame of alternator either by the mounting bracket or a ground wire to the tab with screw on the side of the alternator.
Reply With Quote