View Single Post
  #5   IP: 12.33.210.66
Old 10-09-2009, 05:18 AM
gmilburn gmilburn is offline
 
Join Date: Apr 2009
Location: Rogers, Arkansas
Posts: 26
Thanks: 0
Thanked 0 Times in 0 Posts
Thanks for all the helpful suggestions and comments.

Yes all gauges came from Moyer Marine--and I am fairly confident that I checked the jumper and made sure it was set on 4 cylinders rather than 6 or 8--but will check again. I agree it seems that the rpms seem high.

I used new 10 gauge wire for the ammeter and 12 gauge for all others. I will check the terminals and connections again--and perhaps use a jumper (outside the cockpit) from the tachometer to the coil to make sure that the new wire is good.

I'm beginning to think the tachometer itself might be bad.

Any other thoughts?

Gary
__________________
-----------------
"HydroPhilic" 1977 Ericson 29 Tall
Beaver Lake, Heart of the Ozarks
Rogers, Arkansas
Reply With Quote