|
Seattle, please confirm the fuse location in the circuit, i.e., protecting the pump only. Without that information the advice is going in a couple of different directions.
If the fuse is protecting the pump only and it ran fine the first day and not the second, carefully follow your wiring and look for damage. Laying across a sharp edge or a hot exhaust pipe is all it takes.
FYI, the published Facet pump current specification is 1.6 amps.
__________________
Neil
1977 Catalina 30
San Pedro, California
prior boats 1987 Westsail 32, 1970 Catalina 22
Had my hands in a few others
|