View Single Post
  #4   IP: 32.211.28.40
Old 11-24-2020, 09:34 PM
Al Schober's Avatar
Al Schober Al Schober is offline
Afourian MVP
 
Join Date: Jul 2009
Location: Uncasville, CT
Posts: 2,002
Thanks: 16
Thanked 578 Times in 405 Posts
Curious why you saw fit to paint the surfaces of the cylinders?
More important, I recommend you install studs in those 8 holes for the jacket cover plate. This will eliminate a leak path from the water jacket. Those bolts are known leakers. Moyer sells a kit for this, but if you can get a foot of 5/16 all-thread, you can make your own studs then seat them in the block with JB Weld. Use stainless nuts and washers to reinstall the cover plate.
Reply With Quote
The Following 2 Users Say Thank You to Al Schober For This Useful Post:
sastanley (11-24-2020), TimBSmith (11-25-2020)