View Single Post
  #1   IP: 38.118.52.41
Old 05-31-2006, 01:23 PM
Don Moyer's Avatar
Don Moyer Don Moyer is offline
 
Join Date: Oct 2004
Posts: 2,811
Thanks: 0
Thanked 183 Times in 124 Posts
Thumbs up Exhaust wrap kit

We just added an exhaust wrap kit to our product line.

Each kit includes 15 feet of 2" wrap and two end clamps. The wrap is 1/16" thick and is usually sufficient to cover 4 to 5 feet of the 1-1/4" piping commonly used in constructing the hot section of an exhaust system. When the wrap is used so that there is approximately 1/4" of overlap, the temperature radiating from the pipe is reduced by 50 to 60 %. When a pipe comes within close proximity to a cockpit floor or other structure, the wrap can be used in two layers.

Don
Attached Images
 

Last edited by Don Moyer; 06-04-2006 at 08:17 AM.
Reply With Quote