View Single Post
  #13   IP: 32.211.28.40
Old 02-19-2017, 08:14 PM
Al Schober's Avatar
Al Schober Al Schober is offline
Afourian MVP
 
Join Date: Jul 2009
Location: Uncasville, CT
Posts: 2,002
Thanks: 16
Thanked 578 Times in 405 Posts
Bobin,
Removing the mixing elbow from the manifold is a piece of cake - a recip saw with a carbide blade will do it in about 30 sec. This will leave half of the nipple in each part - also removable using the same tool. Each half gets two saw cuts on the inside about 1/4 inch apart - try not to get into the female threads. Knock out the pieces between the cuts, then collapse what's left of the nipples.
Reply With Quote
The Following User Says Thank You to Al Schober For This Useful Post:
Marian Claire (02-21-2017)