View Single Post
  #5   IP: 204.141.172.89
Old 11-11-2020, 10:37 PM
Wrsteinesq Wrsteinesq is offline
 
Join Date: Jul 2013
Posts: 90
Thanks: 6
Thanked 15 Times in 10 Posts
It definitely was in the raw water discharge. Leaving the heat exchanger, I took a tee off it, which stepped down to a smaller line, perhaps 1/4 inch or 3/8 of an inch, which ran to the PSS. The remaining, main, portion of the raw water discharge (5/8”?) ran to the sensor, and then to the standpipe. So my belief is, that because not enough water was making it through the sensor, that it was backing up, upstream, and the only place for it to go was out through that 1/4 inch or 3/8 inch line to the PSS.
Reply With Quote