View Single Post
  #5   IP: 162.219.70.239
Old 10-10-2020, 09:24 PM
Peter's Avatar
Peter Peter is offline
Afourian MVP
 
Join Date: Jul 2016
Location: Nova Scotia, Canada
Posts: 297
Thanks: 162
Thanked 140 Times in 101 Posts
Mark,

There are two rubber seals in the pump housing that are supposed to seal

1) the coolant side of the pump, and
2) the accessory drive side of the pump

You may want to pull the pump shaft and inspect it for wear - if it is badly worn replacing the seals will be for nought. You can get a new shaft but you may also wish to consider the MMI pump.

HTH,

Peter
Reply With Quote
The Following 2 Users Say Thank You to Peter For This Useful Post:
MarkVon (10-12-2020), W2ET (10-10-2020)