Starting handle ok....so I will need to revisit getting it to seat..pausing inquiry.
Quote:
Originally Posted by Dave Neptune
Tim, no that is a starting handle. It will turn the engine in only one direction and once the engine starts the handle is forced away so it does not wind up your arm!
It is the pin that won't absorb enough torque to break stuck rings loose, it takes lots of force in BOTH directions.
Dave Neptune
|
Got it. Both of you say it should fit the pins. When I am not on more critical things will see if I can get it to seat at another time.
Thank you. Stay well.
Now sending lubricating thoughts to get this pretty engine unseized....
__________________
Tim Smith
Oasis
Pearson 30
1974, Number 572
Boston, MA USA
|