View Single Post
  #5   IP: 162.245.50.230
Old 06-22-2022, 02:53 PM
Dave Neptune Dave Neptune is offline
Afourian MVP, Professor Emeritus
 
Join Date: Jan 2007
Location: Grove, Oklahoma
Posts: 5,035
Thanks: 711
Thanked 1,289 Times in 839 Posts
That exhaust is a poor design! The injection point should be far below the "el with the injection nozzle" as water could easily get in during cranking.

The exhaust hot section should rise up a few more inches if possible and the injection point must be much lower. How much room do you have?

Dave Neptune
Reply With Quote