Paging Dave Neptune!!! (He owned an E-35 for many years, he will have all kinds of tricks up his sleeve..)
The PO of my boat reinforced the valve tool with a small brace to strengthen the 90° fixed part of the tool. Not sure if it is necessary, but I am guessing he bent the tool, hence the reinforcement.
__________________
-Shawn
"Holiday" - '89 Alura 35 #109
"Twice Around" - '77 C-30, #511 with original A-4 & MMI manifold - SOLD! (no longer a two boat owner!!)
|