View Single Post
  #10   IP: 32.211.28.40
Old 10-02-2021, 08:16 PM
Al Schober's Avatar
Al Schober Al Schober is offline
Afourian MVP
 
Join Date: Jul 2009
Location: Uncasville, CT
Posts: 2,002
Thanks: 16
Thanked 578 Times in 405 Posts
Re: alternator: Agree that you won't need 100 amps. Doubt if a single Gp 24 will ever draw 20 amps.
Side plate: clean the bolt holes in the block and install studs. You can use the Moyer kit or make your own studs. A 12" length of stainless 5/16 all-thread is more than enough for 8 studs. Use JB Weld to set them. Use a tooth pick to put some into the female threads in the block and onto the end of each stud, then just thread them in to the proper standout.
Reply With Quote
The Following User Says Thank You to Al Schober For This Useful Post:
TimBSmith (10-02-2021)