Thread: No Neutral?
View Single Post
  #17   IP: 73.224.235.78
Old 05-09-2017, 10:20 AM
sallyjane823 sallyjane823 is offline
Senior Member
 
Join Date: Feb 2017
Location: Saint Augustine, FL
Posts: 10
Thanks: 8
Thanked 0 Times in 0 Posts
[QUOTE=Al Schober;105411]Sally,
Al Schober said: Engine end of the jacket is anchored to a wood block bonded to the hull.

I think my engine end of the jacket is anchored to a metal brace which is held in place and connected to the cover of the transmission housing, using bolts that go through both the metal brace and the cover. When you remove the four bolts on the square plate covering the transmission housing, it also releases this brace, and the other end appears to be attached to the cable which is attached to the transmission lever on the engine. Problem is that I can't see where it attaches to the cable because there is only a small opening beyond the engine into which both the brace and the cable are connected, I suppose.
Reply With Quote