View Single Post
  #13   IP: 174.56.130.164
Old 10-04-2020, 09:27 PM
blhickson's Avatar
blhickson blhickson is offline
Senior Member
 
Join Date: Nov 2012
Posts: 107
Thanks: 37
Thanked 5 Times in 5 Posts
Continuing cooling system clean out.

So I removed the alternator, and the cooling jacket plate and cleaned out as much crud as I could by hand and by using a small measuring spoon. That was a mess. When I was replacing the jacket plate, apparently some threads stripped in 2 bolts, and , of course not adjacent to one another. I’ll order the side plate repair kits (for all bolts just in case) and go from there. Sigh...still have not flushed the system. Onward and upward. Upon others’ recommendations, will be going to fresh water cooling system from here on.
__________________
Barbara L. Hickson
Flight Risk
C&C 33-1
Chas., SC

Last edited by blhickson; 10-04-2020 at 09:31 PM.
Reply With Quote
The Following User Says Thank You to blhickson For This Useful Post:
TimBSmith (10-05-2020)