Quote:
Originally Posted by Peter
The A4 is a flathead. The valve stems and springs are accessed via a plate on the manifold side of the block. So no need to remove the head to adjust the valves.
Most engines are installed in tight engine compartments where this job is awkward to do.
I am wondering if you have a copy of the maintenance manual that was produced by Moyer? It is an excellent investment and a nice way to support the hosts of the forum.
https://moyermarine.com/product/serv...erhaul-manual/
Best,
Peter
|
Thanks Peter, I found a copy of the service manual on my boat. It's been a huge help, about to put in my third and hopfully final order with moyer.the parts have been excellent
__________________
68 Pearson Renegade- undergoing refit, soon to be sailing the rocky coasts of Maine.
-Schooner Crew-
Yachties wear gloves, Schooner crew grow their own ;)
|