Thanks roadnsky (and all others). I will be following up on these suggestions over the next few days. A fuel pressure gauge (with brass barb-NPT fittings) is on its way. Maybe more significantly is that I discovered what appears to be some wiring errors following my recent ignition switch replacement. Specifically , there is a wire connecting the COIL + to SOL "S" and another wire between IGN and SOL + (big term). They don't appear in any wiring schematics I've seen. Also I need to verify that IGN post on the ign switch is indeed connected to COIL + (the usual purple wire that is hard to trace thru the wiring harness)
I will report back on what's up ASAP.
Thanks again!
DonC
|