I don't know this for sure, but I think you risk exposing the oil system if there is no pump attached to the back of the accessory drive. I am pretty sure engine oil lubricates the shaft up to the first shaft seal inside the pump.
A block off plate, similar to what is used when the mech. fuel pump is removed in favor of electric, may fix that problem. You'd have to fabricate something I think..not sure a 'water pump delete plate' exists.
__________________
-Shawn
"Holiday" - '89 Alura 35 #109
"Twice Around" - '77 C-30, #511 with original A-4 & MMI manifold - SOLD! (no longer a two boat owner!!)
Last edited by sastanley; 04-28-2021 at 01:13 PM.
|