Yep, I'm all wet.
I zoomed in on the photo and the shaft hole looks same size. It was an illusion that they were different.
So with that, I would say* there is nothing wrong with a new set of holes 60-degrees off from the originals.
I would guess the machine shop quote will be the final deal-no-deal breaker.
My two cents anyway.
*My advice is worth every penny you paid for it
__________________
Whiskeyjack a '68 Columbia 36 rebuilt A-4 with 2:1
"Since when is napping doing nothing?"
Last edited by lat 64; 05-28-2020 at 02:16 PM.
|