View Single Post
  #27   IP: 97.73.48.62
Old 06-29-2014, 10:04 AM
Don Moyer's Avatar
Don Moyer Don Moyer is offline
 
Join Date: Oct 2004
Posts: 2,811
Thanks: 0
Thanked 183 Times in 124 Posts
For Sailalibi post #25: Yes, thanks for asking. All of the current kits will have the new configuration and appropriate instructions. There has been no change to the basic housing. The only change has been to the bearing stop ring on the shaft so as to move the bearings approximately 1/4" to make room for the oil seal on the impeller chamber side of the bearings. Don

Last edited by Don Moyer; 06-29-2014 at 10:07 AM.
Reply With Quote