I installed the Moyer kit two years ago and am very happy with it.
I'd say the most difficult part of the job was locating the heat exchanger. You have to be able to run 4 hoses to it, plus have access to the fill cap and the zinc. And it helps if it's sorta vertical.
I had no problem with the pump on the front of the engine. Engine turns, pump turns, no worries about electric. I started school as an EE, changed to Mechanical. Never could remember that ditty for power - it was either 'Twinkle, twinkle, little star, power equal i squared r" or "Birdie, birdie, in the sky, power equals r squared i".
|