View Single Post
  #9   IP: 174.76.17.146
Old 03-15-2022, 04:13 PM
Jim c Jim c is offline
Frequent Contributor
 
Join Date: Aug 2021
Posts: 8
Thanks: 0
Thanked 2 Times in 1 Post
Sorry I didn't get back here sooner but ran into another problem had to rebuild the carburetor just beware when you buy an engine that says remanufactured from eBay okay getting back to the distributor I found top dead center of number one and the rotor is pointing straight towards the block and when I put the cap on it's in between two plugs now should I assume the distributor is installed incorrectly ? I have noticed the condenser and the oil filter tube are not touching the block or the alternator belt so it's just the rotor put in the wrong place being the early model distributor can I loosen and rotate the rotor to the correct position like in the video? If so how? Please excuse my ignorance I'm not a mechanic at least not yet I need all the help I can get thank you
Name:  IMG_20220315_130831623.jpg
Views: 422
Size:  202.6 KB
Reply With Quote