Thread: Milky Oil
View Single Post
  #7   IP: 165.225.38.195
Old 11-12-2021, 06:16 AM
prstack7's Avatar
prstack7 prstack7 is offline
Senior Member
 
Join Date: Aug 2011
Location: Rochester, NY
Posts: 71
Thanks: 1
Thanked 2 Times in 2 Posts
I have been reading the various threads on this issue. I'm hoping that this was the result of an event, such as the water spray in the engine compartment or infiltration through the exhaust (no plate over my tail pipe). I was able to rule out cracks in the manifold or the block, plus engine compression test shows great on all 4 cylinders, so that's good. The boat's on the hard now, so it will have to wait until next year to know for sure. It was definitely not extended cranking. The one bummer is that, while putting the valve cover plate back on, I broke a bolt by overtightening. Now I have another problem to solve.
Reply With Quote