View Single Post
  #1   IP: 69.250.109.188
Old 03-16-2021, 09:55 PM
scratchee scratchee is offline
Senior Member
 
Join Date: Feb 2020
Posts: 97
Thanks: 27
Thanked 44 Times in 28 Posts
Cleaning a bare block: acid in cylinders?

I have my block stripped bare and am trying to figure the best way to clean it, worst need being the cooling passages. If I use some sort of acid bath, could it damage the cylinder walls? I have no need to do anything with the cylinders, but since everything is stripped off the block I can't exactly "flush" the passages alone since there are openings everywhere.

Is there a standard approach at this stage? Thanks for any advice!
Reply With Quote