Quote:
Originally Posted by jcwright
In your second photo, did you check in the hole directly "above" the spindle? Has this engine been rebuilt before?
|
The hole circled in read I'll have another look but didn't notice anything in there last night. The hole with the green arrow is for a stud.
I'll try and have another look at the old parts manual as well to see if the helps. The exploded diagram for this spindle and gear don't show any set screws itself.
No idea if this engine has ever been rebuilt but if it was they totally missed the valves or poorly ran the engine - they have over an 1/8" of carbon buildup under the heads!