View Single Post
  #24   IP: 137.103.82.194
Old 05-14-2017, 10:37 AM
joe_db's Avatar
joe_db joe_db is offline
Afourian MVP
 
Join Date: May 2009
Posts: 4,474
Thanks: 49
Thanked 1,026 Times in 721 Posts
My riser goes up 5 inches (I think...might be 4 or 6), does a 180 degree turn, and then goes back down the same distance. You want the riser as high as possible and the other end as low as possible * as long as it is still higher/even with the water lift*. You do NOT want it to have any upward slope between riser and water lift at all.
Reply With Quote
The Following User Says Thank You to joe_db For This Useful Post:
Fstued (07-11-2017)