View Single Post
  #14   IP: 108.66.129.43
Old 02-21-2017, 05:37 PM
BobinSF BobinSF is offline
Senior Member
 
Join Date: Oct 2008
Location: San Francisco
Posts: 12
Thanks: 0
Thanked 0 Times in 0 Posts
Removing the mixing elbow from the manifold is a piece of cake - a recip saw....

Al Schober, your method worked just fine; thank you.

Needle scaling is proceeding well, and I am able to do it on the machined manifold-to-block surfaces without marring them.
Reply With Quote