Thread: Oil change kit
View Single Post
  #6   IP: 23.245.218.108
Old 01-08-2023, 06:14 PM
msmith10's Avatar
msmith10 msmith10 is offline
Afourian MVP
 
Join Date: Jun 2006
Location: Columbus, Ohio
Posts: 474
Thanks: 19
Thanked 62 Times in 46 Posts
I don't know what tubing is connected to your oil removal pump, but in general, Moyer's oil change kit comes with barbed fittings to connect the drain tubing with your pump tubing, and a cap to cap off the drain tubing. If the included barbed fitting is not the right size for your vacuum pump, just take your pump and the supplied fittings to a hardware and see if they can fit something up. Some of those pumps have a thin long tube that's meant to go down the dipstick tubing, in which case You may need to change out the hose on the pump, or splice a different sized hose onto the pump hose (using barbed fittings) if you can't find appropriate adapters. Get brass, not plastic.
__________________
Mark Smith
1977 c&c30 Mk1 hailing from Port Clinton, Ohio
Reply With Quote
The Following User Says Thank You to msmith10 For This Useful Post:
Golfdad75 (01-09-2023)