That is a beautiful, custom, braided, reinforced, old-school fuel line…past its useful lifespan.
Let it R.I.P. and replace it with two brass angled fittings, threaded on one side and barbed for 1/4” hose on the other, along with alcohol-resistant 1/4” fuel line you’ve cut to the right size, and two hose clamps. You can get the fittings in a home improvement store. I think they sell the fuel line too, but if not, an auto parts store will.
If the angled fittings bump into the engine as you screw them in, just use straight fittings.
|