View Single Post
  #123   IP: 142.116.40.164
Old 07-28-2022, 10:07 AM
GregH's Avatar
GregH GregH is offline
Afourian MVP
 
Join Date: Jun 2015
Location: Kingston, ON
Posts: 564
Thanks: 385
Thanked 103 Times in 80 Posts
The engine has been in for a couple of months now and still tweaking things. Running rich so slowly getting that adjusted in but otherwise running very smoothly, idling around 900. Also still having slight low oil pressure but am dialing that in.


Am having an issue with the exhaust pipe. I reused the existing as there was nothing rusted out about it. But it "appears" have a small leak between the exhaust flange and the threaded pipe (along the threads). I originally tried to get the flange off but to no success. With a CO meter this is where I am detecting the leak. Before I rebuild the system, is there a sealant I can use to get through the rest of the season up here in Canada?
__________________
Greg
1975 Alberg 30
Reply With Quote