View Single Post
  #6   IP: 162.245.50.196
Old 07-18-2022, 04:39 PM
Dave Neptune Dave Neptune is online now
Afourian MVP, Professor Emeritus
 
Join Date: Jan 2007
Location: Grove, Oklahoma
Posts: 4,704
Thanks: 617
Thanked 945 Times in 635 Posts
The loose plate will really kill water flow under any kind of pressure as it sucks in air. The plate needs to be "flat" and the "0" ring must be seated. If any air is getting sucked in anywhere the system will not function well.

Also take a good look at the impeller as running dry will damage it quickly.

Check for a restriction at the exit fitting on the manifold sa it can gather krap and restrict flow.

Dave Neptune
Reply With Quote
The Following 2 Users Say Thank You to Dave Neptune For This Useful Post:
Sam (07-18-2022), TimBSmith (07-18-2022)