View Single Post
  #3   IP: 32.211.38.220
Old 06-08-2022, 09:11 PM
Al Schober's Avatar
Al Schober Al Schober is offline
Afourian MVP
 
Join Date: Jul 2009
Location: Uncasville, CT
Posts: 1,912
Thanks: 12
Thanked 507 Times in 362 Posts
I've never had an issue removing the bolts between the coupler and the transmission flange. No need to block the propeller. Just put a box wrench (1/2" as I recall) on the bolt head and tap it with a hammer - bolt will loosen. Do the next one, etc. Once the three bolts are out, just slide the shaft and coupler back a bit.
Reply With Quote