Resetting of Number 1 cylinder
I noticed the cylinders have been wired in reverse from the distributor, meaning the 1-position on the distributor goes to number-4 cylinder, 2-position to number-3, 3-position to number-1 and finally 4-position to number-2 cylinder, so in terms of firing order, correctly I think. If however I were to rewire according to the book, would I simply find the top of true cylinder-1 (first from the flywheel) and connect to distributor position-1 and then follow the usual firing pattern for the other cylinders, or is there something else I should know? My thinking is, since the distributor is firing in correct order there's nothing that needs to change there. Thanks.
|