[MightyMike]

I have removed the carburetor again for another cleaning and a float adjustment based on what I have learned here.

I have spoken to the previous owner who tells me re did a full rebuild 7 or 8 years ago. I am thinking I will go with the more limited zenith kit since he has already changed out all the Jets etc. Based on this timeline, does anyone think I should do a full rebuild instead?

I have also mangled the scavange tube. I have ordered the replacement, but it is back ordered. I used a bit of jbweld to seal the fittings the last time, but I am thinking of replacing with caps temporarily while waiting for the back order.

I know they are 1/8 flair fittings, bit I don't know what the threaded side is. They seem larger than 1/8 inch.

Thanks