View Single Post
  #9   IP: 38.118.52.41
Old 07-16-2006, 09:18 AM
Don Moyer's Avatar
Don Moyer Don Moyer is offline
 
Join Date: Oct 2004
Posts: 2,811
Thanks: 0
Thanked 183 Times in 124 Posts
There should definitely be a drain hole in the bottom of the housing of the MMI flexible impeller pump, the same as you see in the top of the housing. That being said, if you're not seeing any drippage below the pump or coming out of the upper weep hole, I don't understand how you could be losing coolant through your pump and into the bilge.

The only items on the MMI pump that should ever need to be replaced are the impeller and a single lip seal. The impeller and lip seal are the same as those items in the Oberdorfer 202M series pumps, and we're still watching the fleet to establish a time change recommendation.

Would you please send me your phone number? I'd like to talk to you about your pump.

Don
Reply With Quote
The Following User Says Thank You to Don Moyer For This Useful Post:
TimBSmith (07-21-2022)