Thread: Rebuild or no?
View Single Post
  #35   IP: 162.245.50.230
Old 01-16-2022, 08:46 AM
Dave Neptune Dave Neptune is offline
Afourian MVP, Professor Emeritus
 
Join Date: Jan 2007
Location: Grove, Oklahoma
Posts: 5,035
Thanks: 711
Thanked 1,289 Times in 839 Posts
Once the valves are moving even if not all the way, they are moving. Keep the spray into the cylinders going and spin on the starter. If the motion increases a bit just go ahead and start it. At engine speed of hi idle should shake the valve completely loose in a few minutes.

Dave Neptune
Reply With Quote