View Single Post
  #2   IP: 47.142.140.12
Old 12-18-2021, 11:09 AM
JOHN COOKSON JOHN COOKSON is offline
Afourian MVP, Professor Emeritus
 
Join Date: Nov 2008
Posts: 3,500
Thanks: 54
Thanked 855 Times in 629 Posts
You need adjust the fixed arm. There is a screw that holds a sort of circular plate in place - that is where the adjustment is.
I scribed a line on the plate and carb body with diamond tip pencil before disassembly so I could line up the fixed arm correctly after doing a carb overhaul so I didn't have to guess the correct position when I reassembled the carb.

ex TRUE GRIT
Reply With Quote
The Following User Says Thank You to JOHN COOKSON For This Useful Post:
ArtJ (12-19-2021)