View Single Post
  #1   IP: 173.247.139.7
Old 02-17-2021, 06:02 PM
svEmerald's Avatar
svEmerald svEmerald is offline
Senior Member
 
Join Date: Oct 2010
Posts: 12
Thanks: 6
Thanked 1 Time in 1 Post
4-5.5 psi facet fuel pump question

Hello, while I would prefer to support our hosts here, the cost of shipping and importing the electric fuel pump system to me here in Canada is cost-prohibitive. I can get the parts I need locally, but the only Facet pump I can locate is the higher pressure one that Moyer specifies for Catalinas (because of the longer fuel run, if I understand correctly). It is the 4 to 5.5 PSI model.

Can I use this pump in a "normal" installation, where the tank-to-carb run is only about 4' total? Or will the pressure be too high and I risk overpowering the carb?
Thanks

Last edited by svEmerald; 02-17-2021 at 06:08 PM.
Reply With Quote