View Single Post
  #4   IP: 32.211.28.40
Old 11-14-2021, 09:04 PM
Al Schober's Avatar
Al Schober Al Schober is offline
Afourian MVP
 
Join Date: Jul 2009
Location: Uncasville, CT
Posts: 2,002
Thanks: 16
Thanked 578 Times in 405 Posts
Install a pressure gauge in the line to the carb. If you lose pressure (for whatever reason) the gauge will tell you, then you can track it down.
Install a test light (LED?) to coil +. If the light goes out, you've lost electrical power, then you can track it down.
Right now you're groping in the dark.
Reply With Quote
The Following 7 Users Say Thank You to Al Schober For This Useful Post:
Ando (11-15-2021), chapster5 (11-15-2021), ColeHarmening (11-17-2021), Dave Neptune (11-15-2021), Peter (11-15-2021), Sam (11-18-2021), TimBSmith (11-14-2021)