View Single Post
  #11   IP: 173.166.26.241
Old 08-22-2010, 08:12 AM
hanleyclifford's Avatar
hanleyclifford hanleyclifford is offline
Afourian MVP
 
Join Date: Mar 2010
Posts: 6,978
Thanks: 172
Thanked 280 Times in 226 Posts
The "springing" closed of the valve is a good thing. It was stuck open. Before you go any further prepare a wooden block with individual holes so that as you disassemble, each valve and its related parts can later go back exactly where it came from. You can complete the cleaning of the block surface with a single edge razor blade or similar tool.
Reply With Quote