View Single Post
  #9   IP: 69.250.109.188
Old 02-16-2021, 09:54 PM
scratchee scratchee is offline
Senior Member
 
Join Date: Feb 2020
Posts: 97
Thanks: 27
Thanked 44 Times in 28 Posts
In another thread from long ago, Mr. Moyer said:

Quote:
It's extremely unlikely (practically impossible) for the last few threads of a hardened stud to hold so tightly as to cause the stud to fail that far below the surface of the block. Therefore, before doing anything else, please inspect the end of the stud that came out of the fourth hole. My guess (hope) is that you will not find a clear fracture zone across the end of the stud, but rather a round and corroded end to the stud.
But I am seeing something very hard and grey at the bottom of these holes, and the studs definitely have a sheared-off look to them. Hmmm...


Last edited by scratchee; 02-16-2021 at 10:32 PM.
Reply With Quote