Quote:
Originally Posted by Surcouf
I would recommend first to take a screw driver and a hammer, and bang whatever is at the bottom of those holes. 90% chance you will go through that bottom crap and end up in the water jacket
|
Right you are! I used a thin metal rod and a light mallet to tap the hole in the corner, and it broke right through. The hole to the right of that yielded a little, but didn't seem to go anywhere straight down, though I was able to poke through to the oblong cooling passage next to it. Obviously those two need to go somewhere else besides connecting to each other. I'll look around for a diagram of the cooling passages.
Thanks!