View Single Post
  #16   IP: 71.16.159.194
Old 05-02-2007, 09:47 AM
Jesse Delanoy Jesse Delanoy is offline
Afourian MVP
 
Join Date: Dec 2006
Posts: 236
Thanks: 0
Thanked 2 Times in 2 Posts
rickrose,

to get the most oil out of the engine during an oil change, I recommend Don's oil change kit, which has a permanent brass tube that installs in the oil drain plug port, and goes nearly to the lowest point in the crankcase. Before I installed the kit, I had success with taping a six inch brass tube around the outside of my flexible pump hose, and lowering that in the drain plug port. The brass tube acted as both a splint, keeping the hose straight, and a weight, keeping it at the bottom of the crankcase.

Jesse
Reply With Quote